China Spray Painting Robot Manufacturers Suppliers Factory - Fiyɛli penti Robot sɔngɔ

Industrial Spray Painting Robots ka ɲɛsin finiw ma minnu bɛ kɛ ni otomatiki ye

Robo min bɛ penti ni fiyɛli ye, o ye izini robo ye min bɛ kɛ otomatiki la, min dilannen don walasa ka finiw datugu, ka penti kɛ ani ka a sanfɛla labɛn. A bɛ baara kɛ ni lamagacogo bolodalenw ye ani fiyɛli kɔlɔsili hakilitigi ye walasa ka penti kɛ cogo kelen na yɔrɔ gɛlɛnw kan ni tiɲɛniba ye ani ka segin-ka-bɔnye kɛ.

Robot min bɛ kɛ ni furaji ye
An ka robo min bɛ fiyɛli da, o bɛ kɛ ka nɛgɛ, plastiki ani baarakɛminɛnw dilannenw mugu da otomatiki la.

Aw ye kunnafoni wɛrɛw sɔrɔ
Porogaramu kɛli Robot de peinture gratuite
Nin porogaramu-feere robo in bɛnnen don fɛn dilanni siraw ma minnu bɛ sigi teliya la, ka segin-ka-bɔnye kɛ tuma bɛɛ, ani ka dɔgɔya ka jigi da robo porogaramukɛlaw kan minnu y’u yɛrɛ di.

Aw ye kunnafoni wɛrɛw sɔrɔ

Fɛɛrɛko ɲɛfɔli

Paramɛtiri	Kɛrɛnkɛrɛnnenya la
Roboti suguya	4 Aksidan / 6 Aksidan
Payload Seko ni dɔnko	Kilo 5-kg 15
Bolo Se ka Se	1200mm-3000mm ye
Segin-ka-bɔnye kɛli	±0,05mm ye
Lakanali Kalanso	IP65/IP67 ye
Montage Type (Sɔrɔ min bɛ Kɛ ka Tɛmɛ	Dugukolo / Kogo / Nɛgɛso
Penti suguya	Ji-Basigilen / Solvent{1}}Basigilen
Spray Teknoloji	Fiɲɛ fiyɛli / Kuran fiyɛli
Kontrɔli Sistɛmu (Système de contrôle).	PLC bɛ se ka baara kɛ ni a ye
Kuran dilancogo	220V/380V
Seereyaw sɔrɔli	CE / ISO9001 ye
Kumaɲɔgɔnya-yɔrɔ	Etɛrinɛti / Industri Bus

Fɛn kolomaw

1.Transfer efficiency bɛ se 65%–85% ma, o bɛ dɔ bɔ fiyɛli kojugu, penti tiɲɛni, ani baara musakaw la.

2.Segin-ka-bɔnye tiɲɛni ±0.05mm bɛ a to finimugu janya bɛ to sen na ani a sanfɛla cogoya sabatilen.

3.A bɛ dɛmɛ don ka tɛmɛn-hakɛ caman bɔli kan walasa ka baarakɛcogo ɲɛ ani ka dɔ bɔ baarakɛbaliya waati la.

Robot Peinture Spray Suguw

Roboti suguya	Aplikasi minnu bɛ kɛ	Nafa kunbabaw
4 Axis Spray Peinture Robot (Roboti min bɛ penti kɛ ni aksidan ye	Panneau plats, kabini, nɛgɛdaga	Muɲu-a bɛ kɛ cogo min na, baarakɛcogo sabatilen, ladonni nɔgɔn
6 Axis Spray Peinture Robot (Roboti min bɛ penti kɛ ni aksidan ye	Mobili yɔrɔw, yɔrɔ kurulenw, plastiki fɛnw	Lamaga-lamagali min bɛ se ka wuli, a bɛ se ka kɛ cogo min na, a bɛ kɛ cogo kelen na
Robot Peinture Mounté Rail	Baarakɛminɛn belebelebaw, minɛn girinmanw	Baarakɛyɔrɔ janyalen, min bɛnnen don fɛn dilanni sira janw ma
Robot de peinture à mur	Fiyɛli siraw jɛlenw, kɛrɛfɛ fiyɛli kɛcogo	Yɔrɔ-kɔlɔsili sigili, baarakɛcogo caman
Robot Peinture Mounté Du Sud	Général industriel fiyɛli	sabatili barikama, jɛɲɔgɔnya nɔgɔn
Robot min bɛ kɛ ni jɛ-ka-baara ye	Batch fitinin ani customized production	Deployment flexible, porogaramu nɔgɔman
Robot de peinture électrostatique à spray	Nɛgɛfɛnw, mobili dacogo	Transfert efficiency ka bon, penti tiɲɛni bɛ dɔgɔya
Explosion-Dalilu Jala Robot	Solvent-based penti sigidaw	Baarakɛcogo lakanani ɲɛnabɔli
Robot Spray min bɛ ɲɔgɔn falen-falen	Panɛriw, daaw, minɛnw pankurunw	Fiyɛli teliya-fiyɛli, min bɛnnen don jamaba dilanni ma
Robot de peinture guidée par vision	Fɛn minnu ka gɛlɛn ani minnu tɛ kɛ tuma bɛɛ	Sira kɔlɔsili hakilitigi, otomatiki ɲɛnabɔlen

"Turnkey" Sistɛmuw jɛlenw

Robo kɔfɛ, an bɛ jɛ-ka-baara di:

Fɛnw dilancogo:

Tansiyɔn tankiw, diaphragme pɔnpew, ani kulɛri-yɛrɛyɛrɛli manifɔliw.

Yeli siraw:

AI-kamera ɲɛminɛlenw ka ɲɛsin yɔrɔw dɔnni otomatiki ma ani siraw bɔli ma.

Lamini kɔlɔsili:

Fiyɛli yɔrɔw ni fiɲɛbɔyɔrɔw ni u filɛcogo kɛrɛnkɛrɛnnen don.

Furakɛcogo minnu bɛ furakɛli kɛ:

IR walima UV jalen tunɛriw faralen ɲɔgɔn kan walasa ka "Daminɛ-ka se-Fɛn" layini dafalen ma.

Teknoloji Dɛmɛ

Ladilikan min bɛ kɛ ni dɔnnikɛlaw ye:

An ka ɛntɛrinɛti injiniyɛriw bɛ ROI sɛgɛsɛgɛli ni cycle waati simulation di fu la ka da i ka 3D CAD filew kan sani i ka sanni kɛ.

On-Siti Komisiyɔn:

An bɛ jamana kɔkan sigili, porogaramu kalanni di aw ka baarakɛlaw ma, ani yɔrɔjan sɛgɛsɛgɛli dɛmɛni Industrial IoT fɛ.

Jogoɲumanya yɔrɔw:

An bɛ baara kɛ ni diɲɛ-kɔnɔnafɛnw ye (misali la, RV Reducers ka bɔ Nabtesco, Delta/Yaskawa Servo Motors) walasa ka ɲɛnamaya jan sabati.

Sɛbɛn minnu bɛ sɔrɔ:

A bɛ bɛn CE (MD/LVD/EMC) ni ISO9001 sariyaw ma pewu

Ɲininkaliw

J: Industri jumɛnw bɛnnen don robow ma minnu bɛ penti ni fiyɛli ye?

A: Robo minnu bɛ penti ni fiyɛli ye, olu bɛ baara kɛ kosɛbɛ mobili, minɛnw, nɛgɛ dilanni, plastiki dilanni, so kɔnɔ minɛnw ani jɔli fɛnw na.

J: Yala robo bɛ se ka yɔrɔ kurulenw fiyɛ wa?

A: Ɔwɔ. 6-robo minnu bɛ ja dilan ni aksidan ye, olu bɛ se ka fɛn caman lamagacogo caman dɛmɛ ani u bɛ se ka yɔrɔ gɛlɛnw fiyɛ minnu kurulen don ani minnu tɛ sigi sen kan ni tiɲɛniba ye.

J: Penti suguya jumɛnw bɛ dɛmɛ?

A: Sisitɛmuw bɛ pentiw dɛmɛ minnu sinsinnen bɛ ji-, penti minnu sinsinnen bɛ solvent- kan, fiyɛli ni kuran ye, ani izini dacogo caman.

J: Yala robo bɛ se ka don ɲɔgɔn na ni fɛn dilanni siraw ye minnu bɛ yen wa?

A: Ɔwɔ. An ka robo sitɛmuw bɛ se ka don ɲɔgɔn na ni conveyor systems ye, PLC controls, jalen siraw, ani automatique production minɛnw.

J: Yala aw bɛ robo ja dilancogo dafalenw di wa?

A: Ɔwɔ. An bɛ robo ja dilancogo fɛɛrɛw di minnu bɛ kɛ ni bolo ye i n’a fɔ robow, fiyɛlilanw, fɛnw lasecogo, jalenw, ani cɛmancɛlafɛnw.

J: Yala aw bɛ dɛmɛ don jamana kɔkan fɛɛrɛko siratigɛ la wa?

A: Ɔwɔ. An bɛ yɔrɔjan fɛɛrɛ dɛmɛni, sigicogo ɲɛminɛni, porogaramuw dɛmɛni, ani feere-feere kɔfɛ baara di diɲɛ kɔnɔ kiliyanw ma.

I n’a fɔ robo minnu bɛ penti fiyɛli la, olu dilannikɛlaw ni u feerela ŋanaw dɔ ye Sinuwa jamana na, an fana bɛ dɛmɛ don baara la min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Aw ye aw yɛrɛ bila ka robo san min bɛ penti ni fiyɛli ye, o min bɛ sɔrɔ stock la yan an ka izini na. Ni aw b’a fɛ ka sɔngɔko lajɛ, aw bɛ se ka kuma an fɛ.