China Welding Robot Manufacturers Suppliers Factory - Ka kɛɲɛ ni mɔgɔw sago ye soudure robo sɔngɔ

Robots de soudure haute précision ka ɲɛsin otomatiki manufacturing ma

Robo min bɛ solda ye, o ye izini robo ye min bɛ kɛ otomatiki la, min dabɔra walasa ka solda baara tigitigiw kɛ ani ka kɛ cogo basigilen na fɛn dilanni sigidaw la. Robo minnu bɛ solda kɛ, olu bɛ baara kɛcogo ɲɛ, ka bololabaarakɛlaw ka filiw dɔgɔya, ani ka soja kɛcogo sabatilen sɔrɔ jamaba dilanni na.

Robot de soudure laser (Laser ka soudure).
Laser yeelen bɛ masinw ka ɲɔgɔnkanu ban, ka baarakɛminɛnw tiɲɛni ni fɛnw ladonni dɔgɔya.

Aw ye kunnafoni wɛrɛw sɔrɔ
Robot de soudure colaborative (baarakɛɲɔgɔnya soudure).
Aw bɛ baara kɛ ni baarakɛlaw ye lafiya la, ka baarakɛlaw musakaw dɔgɔya, ani ka soja kɛcogo ɲuman sabati ni an ka jɛkafɔ robo ye.

Aw ye kunnafoni wɛrɛw sɔrɔ
Robots Soudure Spot (Spot Soudure) ye
Dɔ fara welding baarakɛcogo ɲuman kan ani a kɛcogo kan ni an ka Spot Welding Robot ye, min dilannen don mobili, minɛnw ani izini nɛgɛw lajɛlenw kama.

Aw ye kunnafoni wɛrɛw sɔrɔ
Robots de soudure automatiques (Robots de soudure otomati...
Aw ye aw ka fɛn dilanni nafa bonya kosɛbɛ ani ka weldacogo ɲuman sabati ni an ka solda robow ye minnu bɛ baara kɛ ni otomatiki ye, minnu dalen bɛ fɛn dilannikɛla ŋanaw fɛ diɲɛ kɔnɔ.

Aw ye kunnafoni wɛrɛw sɔrɔ
Robot de soudure min bɛ bolo la
A bɛ laser ni MIG/TIG welding baara fila bɛɛ dɛmɛ

Aw ye kunnafoni wɛrɛw sɔrɔ
Robot min bɛ tigɛ ni laser ye
A bɛ panɛri kurulenw tigɛ, kɔnɔna tigɛyɔrɔw, fiɲɛbɔyɔrɔw, ani nested dilancogo k’a sɔrɔ a ma re-fixturing.

Aw ye kunnafoni wɛrɛw sɔrɔ
Robot de soudure filanan
Six-axis welding bɛ se ka kɛ sababu ye ka angle complexes ni narrow bends welding kɛ, o bɛ yɔrɔ dɔw sigicogo kura dɔgɔya fo ka se 40% ma.

Aw ye kunnafoni wɛrɛw sɔrɔ
Argon Arc Soudure Robot (Robot de soudure) ye
Argon Arc Welding Robot min bɛ weldingw di minnu bɛ kɛ cogo kelen na, minnu ka ɲi -, nɛgɛ inox, aluminiyɔmu ani nɛgɛdaga dɔgɔmanninw yɔrɔw kan.

Aw ye kunnafoni wɛrɛw sɔrɔ
Robotique Spot Soudure (Soudure de Spot Robotique) ye
Robotic Spot Welding ye MIG spot welding system ye min teliya ka bon, min bɛ kɛ otomatiki la, nɛgɛ cɛmancɛ ni nɛgɛ gɛlɛnw dilanni kama. A bɛnnen don mobili, fɛnɲɛnɛmaw, ani nɛgɛso dilanni siraw ma...

Aw ye kunnafoni wɛrɛw sɔrɔ

Fɛɛrɛko ɲɛfɔli

Paramɛtiri	Kɛrɛnkɛrɛnnenya la
Robot (Robot Axis) ye	6 Aksidan
Payload Seko ni dɔnko	6kg-20kg
Bolo Se ka Se	1400mm-3000mm ye
Segin-ka-bɔnye kɛli	±0,05mm ye
Soudure (Soudure) suguya	MIG / TIG / Yɔrɔ / Laser
Montage Type (Jɛkulu min bɛ don a kɔnɔ).	Dugukolo / Kogo / Nɛgɛso
Lakanali Kalanso	IP65/IP67 ye
Kontrɔli Sistɛmu (Système de contrôle).	PLC bɛ se ka baara kɛ ni a ye
Kumaɲɔgɔnya-yɔrɔ	Etɛrinɛti / ProfiNet
Kuran sɛnɛyɔrɔ	220V / 380V
Seereyaw sɔrɔli	CE / ISO9001 ye

Fɛnɲɛnɛma kɛrɛnkɛrɛnnenw ka kɛɲɛ ni baarakɛcogo ye

Robot Sistɛmu suguya	Baarakɛcogo minnu bɛ Kɛ cogoya la	Nafa min bɛ sɔrɔ fɛɛrɛko siratigɛ la
MIG/MAG Soudure (Soudure) ye	Nɛgɛw jɔcogo, Mobili chassis	Teliyaba ni -sɔgɔsɔgɔninjɛ porogaramuw dɔgɔyalen don.
TIG Sistɛmu Robotiki	Inox, Degun minɛnw	Seams saniyalenw, cɛɲiw ni pulse control.
Spot Welding (Spot Soudure) ye	Mobili farikolo, Galonize sɛbɛnw	Teliyaba-teliya segin-segin yɔrɔ ɲɔgɔndan.
Soudure laser (Laser ka soudure).	EV batiriw, Precision ɛntɛrinɛti	Ultra-funteni dɔgɔyalen doncogo; fɛn caman tigɛli min ka dɔgɔn.
Cobot Soudure (Soudure) ye	Batch misɛnninw, Flexible baarakɛyɔrɔw	Baarakɛɲɔgɔnya lakananen; nɔgɔya ɲɛminɛ-setup fɛ.
Gantry / Sistɛmu Nɛgɛso	Masina belebelebaw-, Kurunw dilanni	Anwɛlɛki belebeleba min bɛ lamaga ɲɔgɔn fɛ.

Welding Process Seko ni dɔnko

Arc Stability & Spatter Kɔrɔsili:

Boloci nizɛri kɔrɔlen ni fanga sɔrɔyɔrɔw bɛ arc baarakɛcogo sabatilen sabati, ka dɔ bɔ post-weld saniya la fo ka se 80% ma.

Laser Seam Tracking & Finding: Bamako, Mali.

Waati lakika-waati musaka sɔrɔli baarakɛminɛnw ka funteni bɔgɔbɔli, jogindaw cɛmancɛw, ani ɲɔgɔndan filiw la.

Multi-Layer Multi-Tɛmɛsira (MLMP):

Algoritmɛ kɛrɛnkɛrɛnnenw ka ɲɛsin-plate welding (10mm+) ma, ka fasa fɛɛrɛ ɲumanw labɛn u yɛrɛma.

Positionner Contrôle synchronisé: Bamako, Mali.

Robo ni positioneur bɛ Taa ɲɔgɔn fɛ cogo dafalen na walasa ka "downhand" welding jɔyɔrɔ ɲuman mara waati bɛɛ.

Porogaramu minnu bɛ kɛ ɛntɛrinɛti kan (OLP):

Dɛmɛ don porogaramu filaninw nizɛri la walasa ka yɔrɔ gɛlɛnw porogaramu k’a sɔrɔ u ma fɛn dilanni sira jɔ.

Soudure Automation Dɛmɛ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

An bɛ welding automation baara dafalenw di i n’a fɔ:

Fɛn dilanni sira labɛnni
Welding taabolo dilancogo
Roboti porogaramuw
Sistɛmu ka jɛ-ka-baara
Installation (dadon) bilasiralikan
Welding sɛgɛsɛgɛli
Fɛɛrɛbɔ kalan

Izini ka fɛn dilanni seko

Ecosystème intégré (Ekositɛmu jɛlen):

Seli kelen-kelen bɛɛ kɔnɔ, Robot Arm + Welding Power Source + Torch Cleaning Station + Synchronized Positioner + Safety Fencing bɛ yen.

WPS ka dantigɛli:

Sitimɛ bɛɛ bɛ Welding Procedure Specification (WPS) sɛgɛsɛgɛli kɛ sani a ka ci walasa ka welda fanga garanti.

72-Lɛrɛ dafalen degun sɛgɛsɛgɛli:

Kɔrɔya sɛgɛsɛgɛli minnu bɛ kɛ tuma bɛɛ, olu bɛ a to kunnafonisɛbɛnw, kabaliw ani servo sitɛmuw bɛ se ka da u kan.

Jateminɛ min bɛ kɛ ni tigitigi ye:

An bɛ baara kɛ ni API/Faro laser trackers ye walasa ka kinematic tiɲɛni sɛgɛsɛgɛ baarakɛ anwɛlɛki bɛɛ kɔnɔ.

O kɔfɛ-Ferekɛlaw ka baarakɛyɔrɔ

Kalo 24 Garanti:

An jɔlen bɛ an ka jɔli jogo kan ni garanti fila-industri-standard ye jɔli yɔrɔw kan.

Yɔrɔjan IoT sɛgɛsɛgɛliw:

Sankaba-kɔlɔsilikɛla minnu bɛ se ka baara kɛ, olu b’a to an ka ɛntɛrinɛti ɲɛmɔgɔw bɛ se ka paramɛtiriw ni hakilinata gɛlɛyaw ɲɛnabɔ yɔrɔjan, ka baarakɛbaliya waati dɔgɔya.

Logistique de pièces de rechange:

Rechares critiques (kabali, torches, reducers) bɛ mara marabolow ka hubs kɔnɔ walasa ka ci sanga 48 kɔnɔ.

Ɲininkaliw

J: Yala aw ka robow bɛ se ka don an ka fanga sɔrɔyɔrɔw la minnu bɛ yen (misali la, Fronius, OTC, Miller) wa?

A: Ɔwɔ. An ka kunnafonidilanw bɛ diɲɛ bɛɛ ka kumaɲɔgɔnya nizɛriw jira minnu bɛ diɲɛ seleke naani solda fanga taamasiyɛnbaw dɛmɛ walasa ka paramɛtiriw bɛɛ lajɛlen kɛ ɲɔgɔn fɛ.

J: I bɛ se ka finman-plate welding minɛ cogo di k’a sɔrɔ i ma jeni{1}}tɛmɛ?

A: An ka sistɛmuw bɛ baara kɛ ni porogaramuw ye minnu bɛ don funteni dɔgɔman-porozɛw ni filiw-dumuni kɛli ɲɔgɔn fɛ walasa ka funteni cogoyaw ɲɛnabɔ platiw kan minnu ka fin fo ka se milimɛtɛrɛ 0,6 ma.

J: Yala aw bɛ welding fixtures (Jigs) ni baarakɛminɛnw di wa?

A: Ɔwɔ, an bɛ fiɲɛbɔlanw dilancogo ni u dilanni di walasa ka fɛnɲɛnamafagalanw siri teliya la- ani ka u bila yɔrɔ la min bɛ se ka segin-ka-bɔ.

J: Yala aw ka sigida bɛ Erɔpu/Amerika woroduguyanfan lakana sariyaw labato wa?

A: Tiɲɛ don. An ka robo selilɛriw bɛɛ taamasiyɛn ye CE- ye, wa u bɛ ISO 10218-1 ni diɲɛ kuran lakanani sariyaw labato.

I n’a fɔ welding robo dilannikɛlaw ni a feerela ŋanaw dɔ ye Sinuwa jamana na, an fana bɛ dɛmɛ don baara la min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Aw ka aw yɛrɛ bila ka robo soudure discount san stock la yan ka bɔ an ka izini na. Ni aw b’a fɛ ka sɔngɔko lajɛ, aw bɛ se ka kuma an fɛ.